Finally had some sunny moments to mess with this issue further. It appears
to have been switches. All were sticky with harden grease. I cleaned with
contact cleaner, determined on switch to be altogether faulty, replaced it
and now am fully functional. Sort of clever mechanisms, I found upon
disassembling one.

I still don't know which fuse this power window circuit is on. Can anyone
help with that?

cheers,
m

On Fri, Mar 19, 2010 at 7:22 PM, mordo <helmut.blong@gmail.com> wrote:

> Thanks, Ken. You and John were right. I manipulated the bundle on the pax
> side and got it up (that's what the girl at the picnic said). The driver
> side is still a mystery. Maybe it's the switch. Maybe it's solar radiation,
> maybe i wasn't holding my tongue the right way.
>
> Crisis averted; van is locked and secured with it's pax side door guts
> hanging out.
>
>
> On Fri, Mar 19, 2010 at 6:59 PM, kenwilfy@comcast.net <
> kenwilfy@comcast.net> wrote:
>
>>
>> -----Original Message-----
>> do not try to force the window up.  you will break the fragile regulator
>> which is nla right now.  you have a broken wire in the door jamb.  you can
>> cut the rubber boot open if you are in a rush and tug on the wires one at a
>> time until you find the broken one.  may be in ds or ps.  start with drivers
>> side first.  splice wire back together for permanent repair or just twist it
>> together to get the window back up for now.  no relay or separate fuse.
>>  seen this a hundred times.  Ken
>>
>>
>
>
> --
> mordo
> 1990 Carat
>

--
mordo
1990 Carat