I used some Permatex to hold the transmission pan gasket in place before
torquing down to Bentley spec.  Now, a leak seems to have developed on the
forward driver's side corner of the pan.  Could the permatex react with the
ATF to cause the leak, or did I just not get the seal in place?  I have some
pics, post after work today - it seems the gasket gets a little thinner
towards the corner.  Either that, or the oil cooler O rings are leaking,
it's in that area - on that side.  I have another gasket, so might drop the
pan and try a reseal.  1st time had the transaxle on the engine stand.

Also, only leaks aggressively under load.  When parked after a drive, the
drip slows and pretty much stops.

Any thoughts appreciated.

Pete
'79 Westy "Aardvark"
'87 Westy "JoesVan"
WWW.Busesbythebeach.com