← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: replacing power steering lines with hoses
From:Shawn Wright <vwdiesels@GMAIL.COM>
Date:Sun, 22 Aug 2010 09:17:55 -0700

The pressure line on my '88 rusted through in '96, as the van had seen a lot
of salt in Ontario with PO. I had a hydraulic shop make a new steel rear
section, but I also replaced the return line with 3000psi hose. Had I known
more, I would have done it all in hose to prevent further problems. However,
I don't drive much in the winter, so the new pipe seems fine after 14 years.
I would expect hydraulic hose to last a lot longer than 6 years - good
quality coolant hoses usually last far longer than that.

On Sat, Aug 21, 2010 at 7:32 PM, Scott Daniel - Turbovans <
scottdaniel@turbovans.com> wrote:

> hi,
> yeah, because metal is more durable than rubber.
> I imagine new rubber hoses in the kits sold will last pretty well though ..
> perhaps not 20 years like the pipes do ..
> but pretty well for say, at least 6 years, would be my guess.
>
> I have never seen any leaks in those junctions it the middle of the pipes.
> the 'problem' with them in my mind is they are not protected against
> corrosion well enough from the factory.
>
> in a dry environment, they don't wear or leak.
> In a corrosive environment ....they get pretty tired by 20 years.
>
>
> Scott
> www.turbovans.com
>
>
> ----- Original Message -----
> From: "Mark" <mbrush@GMAIL.COM>
> To: <vanagon@GERRY.VANAGON.COM>
> Sent: Saturday, August 21, 2010 8:28 AM
> Subject: replacing power steering lines with hoses
>
>
>  Anyone have experience with replacing the metal power steering lines with
>> hoses?  Seems like a good option for three reasons: 1) No need to drop the
>> gas tank to do the work, 2) no need to worry about rusting lines again,
>> and
>> 3) it eliminates the junction in the middle of the metal lines -
>> eliminating
>> another potential spot for a leak to develop.  But there must have been
>> some
>> reason the vans with built with metal lines in the first place.
>>
>> Mark
>>
>> --
>> Mark
>> 1990 Westy (2.1 - manual)
>>
>

--
Shawn Wright

Next in thread →
Back to August 2010, week 4
Have something to add on this topic today? Revive this thread in the forum »