hold on there there...

2 screws under the ridge on the face of the plate, and a screw on each
side of the unit. Then its a wiggle and pull.

alistair

On 27-May-11, at 7:55 AM, Richard A Jones wrote:

> I want to remove the panel below the sink/stove--the one
> where the LED panel is mounted and the gas knobs are.
>
> I have it loose and can pull out the bottom.  I thought
> it just was in a groove of the sink/stove stainless and
> should come up out of that groove and be off.
>
> Is that right?  I can't seem to budge mine, but it does
> have 24 years of stuff down in that groove.  Or is there
> something I don't know about it?
>
> Thanks,
> Richard
>
> PS: I want to remove that panel because I smell propane
> there.  The stove burners work fine, but when (at least)
> one is one, there is a faint propane smell coming through
> that vent between the knobs.