← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: steel coolant lines on a '84 westy
From:Dave Mcneely <mcneely4@COX.NET>
Date:Mon, 25 Feb 2013 16:27:52 -0600

---- Scott Daniel - Turbovans <scottdaniel@TURBOVANS.COM> wrote:
> It had to be an 83 or 84 ..
> and most likely a Westy ..
> two hints ...............the old mounting bracket for the wbxr coolant
> pressure bottle .
> and the upholstery.

Would the subject line give anyone a hint that it was an '84?  Just wonderin'.   mcneely

>
> On 2/25/2013 12:30 PM, nirav patel wrote:
> > My bad.  It's a '84 westy, formerly powered with the 1.9L engine.
> >
> > Thanks for the kick in the pants, Jarrett.
> >
> > +n
> >
> >
> > On Mon, Feb 25, 2013 at 1:56 PM, Scott Daniel - Turbovans <
> > scottdaniel@turbovans.com> wrote:
> >
> >>   Just make sure the coolant is going through the radiator in the correct
> >> direction.
> >> I.e. one pipe is 'feed to the radiator' the other is 'return to the
> >> engine' ..
> >> Bentley shows you which is which.
> >> 'the rule' at the radiator about which is which 'down and out' ...
> >> the bottom connection sends coolant back to the engine.
> >>
> >> It always helps if people say what year and version of vanagon they are
> >> asking questions about.
> >> Looks like it was an 83 waterboxer to me.
> >>
> >> I thought this type engine conversion was a no-brainer and eeverythingjust bolts right up from the kit.
> >>
> >>
> >>   On 2/25/2013 9:55 AM, nirav patel wrote:
> >>
> >> Hey all,
> >>
> >> Was wondering if anyone on this list has replaced the original steel
> >> coolant lines with the 1.5'' four part system?  I finally got mine in place
> >> in addition to a new radiator and had a few questions in terms of the
> >> install.  The pipes are strong and sturdy under the van, but I plan to use
> >> some worm drive clamps to get a tighter fit.
> >>
> >> The question I have is with the pipe entry points into the engine bay. They
> >> are not exact.  It seems like I will make it work in terms of attaching to
> >> the coolant hoses, but just wanted to know if anyone else had the same
> >> placement of pipes.  Essentially I want to make sure I did not do anything
> >> glaringly wrong.
> >>
> >> video of underside of van:http://www.youtube.com/watch?v=mXfMl5ZzNZA
> >>
> >> video of engine bay (100Mb file):http://dl.dropbox.com/u/867582/steel-lines.MOV
> >>
> >> images:http://dl.dropbox.com/u/867582/steel-lines1.JPGhttp://dl.dropbox.com/u/867582/steel-lines2.JPGhttp://dl.dropbox.com/u/867582/steel-lines3.JPG
> >>
> >> I think I might be firing up this van soon.  Wish me luck. I'll be the last
> >> in the group-18 bostig.  Quite an achievement.
> >>
> >> +n
> >>
> >>
> >>
> >>

--
David McNeely

← Previous in threadNext in thread →
Back to February 2013, week 4
Have something to add on this topic today? Revive this thread in the forum »