← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: can't go forward
From:Dennis Haynes <d23haynes57@HOTMAIL.COM>
Date:Sun, 16 Jun 2013 16:39:08 -0400

ATF fluid level has to checked with the engine running. Low level can cause
these symptoms, (intermittent operation) and do a lot of damage, Excessively
high fluid level can also cause damage for other reasons.
Check the level carefully. Most likely you are looking at an overhaul of
some level.

Dennis

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Lisa Bloch
Sent: Saturday, June 15, 2013 10:52 PM
To: vanagon@GERRY.VANAGON.COM
Subject: can't go forward

Last Sunday, at Camano Island, the van wouldn't catch after three days of
sitting unstarted.  The WetWesties got it going and it's been running
beautifully ever since.

Today I drove about four miles, turned a corner, and stopped moving.

I have reverse gear (automatic transmission), but no forward gears.  There's
a small transmission leak when the engine is running, but not apparently
when it is not. All the fluids are present in apparently proper amounts.
Maybe a bit too much transmission fluid.

AAA towed it to a friend's driveway.  Any guesses as to the problem?

Lisa Bloch
lab@rynth.org
'89 camper 2.1L automatic

← Previous in threadNext in thread →
Back to June 2013, week 3
Have something to add on this topic today? Revive this thread in the forum »