Thanks for the information folks.

Seems I jumped to a conclusion in assuming I was dealing with a stock
connector and (if applicable) stock cabling. Hope the info I posted
wasn't too misleading.

Even though the repair I did to my '81 has held up and the part is
rated for outdoor use, given it's location and application, I can see
how it might not hold up over the long term.

Neil.

On 2/2/15, Neil N <musomuso@gmail.com> wrote:

> Images of a failed shore power connector (110VAC hook up on vehicle)
> on a Canadian
> Vanagon Westfalia. Found this while in camp:
>
> https://picasaweb.google.com/musomuso/WestfaliaShorePowerCord
>
> I know this has been discussed, and may only apply to Canadian
> Westies, but regardless, thought I'd suggest it's worth checking your
> shore power connector.

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>