Sure, if you have one. Doesn't HF ship to Canada?

Stuart

-----Original Message-----
From: Neil N [mailto:musomuso@gmail.com] 
Sent: Wednesday, March 30, 2016 12:47 PM
To: Stuart MacMillan
Cc: vanagon@gerry.vanagon.com
Subject: Dial Gauge. Was: Re: Oily Oily Clutch. ....

re: dial gauge

Assuming all surfaces are clean...

Would a thick piece of plate steel mounted to engine lower mount studs provide a stable enough surface for a dial gauge using a magnetic base?
I'd make sure the surface of the steel plate was flat.

Can't find a local supplier of this type of dial gauge:
http://www.harborfreight.com/clamping-dial-indicator-93051.html

Thanks

Neil.

On 3/29/16, Stuart MacMillan <stuartmacm@gmail.com> wrote:

>  ..... you'll need a clamp-on dial indicator to do it right.
> Our friends at HF have one that will work:
> http://www.harborfreight.com/clamping-dial-indicator-93051.html

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>