| Subject: | Re: Battery light comes on above 3200 rpm |
| From: | David Beierl <dbeierl@GMAIL.COM> |
| Date: | Wed, 8 Apr 2020 00:41:25 -0400 |
>
> The belt was just recently replaced. Had about 0.5 - 1” flex in it. Could
> it be too tight?
Bentley spec for a belt that length is 0.4 inches for a new (less than ten
minutes service) belt with "thumb pressure" meaning about 25 lbs pressure;
and 0.6" on a belt that's been run. Err slightly on the tight side as alt
and p/s belts are just barely over the 1-meter limit for half that amount.
Yrs,
d
